Resin joints for low voltage in flood-prone ground
When a joint may end up under water, cast resin seals it completely. There are straight models and Y and T branch joints.

In low voltage, a joint buried in ground that floods is exposed to water getting in, and water brings faults. Cast-resin joints are assembled inside a mould that is filled with resin: as it cures, the resin surrounds the connection and seals it.
Three shapes, depending on the network
- ER straight joint: to join two lengths of cable.
- Y branch (YC) and T branch (ET): to take a branch off the main cable.
All three are for cables up to 1 kV, and their generous volume makes multicore cables easier to work with. The mould can be clear polycarbonate or coloured PVC. The polycarbonate model is approved by UTE.
If you need to specify the joints for a project, send us an enquiry with the cable type and size.