Crimping lugs: which tool to use for each cable size
From 150 to 800 mm², Cembre hydraulic tools are chosen by cross-section and by crimp type: hexagonal or deep indentation.

A crimped lug or connector only performs well if the crimp is the one the manufacturer specifies: the force, the die and the crimp type have to match the connector and the cable cross-section. That is why the tool is chosen before heading out to the job.
Hexagonal or deep indentation
In a hexagonal crimp, the die surrounds the connector and leaves it hexagonal. In deep indentation, a punch marks the connector at one or more points; it is how connectors for aluminium cables are installed, such as the bimetallic lug and the aluminium connector.
The tool, by cross-section
- Up to 150 mm²: HT 45-E, light and compact, 50 kN.
- Up to 240 mm²: HT 51, two-speed and designed for tight spaces, 50 kN.
- Up to 400 mm² hexagonal and 240 mm² deep indentation: HT 131-UC, 130 kN.
- Up to 800 mm² hexagonal and 630 mm² deep indentation on aluminium: the RHU 230-630 head, 230 kN, with the PO 7000 foot pump or the B70M-P24 electro-hydraulic pump.
For the bimetallic lug, for example, the HT 131-UC is recommended up to 240 mm² and the RHU 230-630 head from 300 to 630 mm².
If you are not sure which die fits your connector, send us an enquiry with the model and the cable size.